Home & Gardening

Published on December 27th, 2014 | by Steven

0

Best Bilge Pumps Reviews Online 2014-2015 | Buy On Amazon

Are you looking for a bilge pump? A bilge pump is a pump that pumps water or other liquids by drawing it in through an intake valve and discharging out through an outlet valve. Bilge pumps function by creating low and high pressure areas within the pump that move water.

There are several different kinds of bilge pumps that you should know about. This article will provide information on some of the top bilge pumps you can purchase. There are manual bilge pumps that run on electricity that you must turn on and off. There are also automatic bilge pumps that run on electricity which turn on and off automatically when they sense the water level is at a certain depth. Then there are manual hand bilge pumps that require you the pump them yourself. Finally there are self-priming and manual priming bilge pumps. Self-priming bilge pumps clear the pumps of air by themselves when they are turned on. Manually priming pumps require you to clear the clear the pumps of air yourself. Bilge pumps often have a hose attached to the discharge outlet valves to drain water away from a certain area.

So why use bilge pumps? Where are they used? Bilge pumps are used to drain water from tanks, pools and aquariums. They are also used in boats to keep the bilge dry. Keeping your bilge dry in your boat is very important. If your bilge is not dry and water keeps accumulating in the bilge your boat can tip over and sink because of all the water on board! Keep this in mind when shopping around for bilge pumps.

SeaSense Hand Bilge Pump Hose

SeaSense Hand Bilge Pump Hose This is the SeaSense hand bilge. This is a hand bilge pump which means you will have to operate the pump yourself by pushing down on the handles to pump water. It is self-priming which means as you begin pumping the pump will automatically clear out any air that is leftover in the pump. It comes in 4 sizes. The sizes are 18 x 20 inches, 24 x 36 inches, 24 x 72 inches and 36 x 36 inches. It costs around $18-$25 depending on the size pump you wish to purchase. This pump is perfect for pumping water out of narrow areas that traditional pumps can’t reach.

Seattle Sports Paddlers Bilge Pump

Seattle Sports Paddlers Bilge Pump This is the Seattle Sports Paddlers bilge pump. It is a hand operated bilge pump. It operates by having someone press on the rubber handle which causes the pump to suck in water and discharge it out through the discharge outlet. It is 21 inches long and about 2 inches wide. It is fairly light weight, weighing only 12 ounces. A hose can be attached to the discharge outlet as well. Is your kayak constantly taking in water and getting you wet? Are you tired of riding in a wet kayak? Then purchase this pump and keep your kayak dry the next time you’re out on the water.

Rule Submersible Bilge Pump, 500 GPH

Rule Submersible Bilge Pump, 500 GPHThis is a Rule submersible bilge pump that has a discharge capacity of 500 gallons of water per hour. It will operate underwater. It is very lightweight and weighs less than 2 ounces. Its dimensions are 7.5 inches in length 6 inches in width and 3.3 inches in height. It runs on a minimum of 12 volts of electricity. The discharge outlet is 3/4 of an inch. This particular pump is small and inconspicuous. It can be used to circulate water in ponds and tanks, and even as a shower pump in an RV. It costs around $18-$25.

Rule 10 Marine Rule 2000 Marine Bilge Pump

Rule 10 Marine Rule 2000 Marine Bilge Pump (2000-GPH, 12-Volt)This is the Rule 2000 marine bilge pump. It is rated at 2000 GPH which mean it can pump up to 2000 gallons of water every hour. This bilge pump has some serious pumping power. It operates on a minimum of 12 volts of electricity. The discharge outlet is approximately 1 and 1/8 of an inch wide. The dimension of the pump is 6.3 inches in length, 4.5 inches in height and 5.4 inches in width. It weighs about 3 pounds. The Rule 2000 marine is submersible which means it can be underwater and it will still pump. It is a manually operated pump that you must turn and off yourself. A brand new Rule 2000 marine bilge pump will cost around $75-$100.

Attwood Tsunami Manual Bilge Pump

Attwood Tsunami Manual Bilge Pump This is the Attwood Tsunami Manual Bilge Pump. It is a manual pump which means you must turn it on and not forget to turn it off yourself. It is available in 3 different sizes, with each size having a different pumping capacity. The 3 capacities that this pump is available in are 500, 800 and 1200 gallons of water per hour. This pump is perfect for small boats. It has easily replaceable and interchangeable motor cores that power the pump and make servicing these pumps a breeze. Have a flooded basement or a swimming pool you want to drain? This pump is perfect for draining basements and pools. This pump sells for $10-$24 depending on the size you wish to buy.

As you can see there are many different kinds of bilge pumps out on the market that you can purchase. First think about what kind of bilge pump you need in order to accomplish whatever it is you plan on doing. Next, you think about the pumping power and capacity that you need to accomplish your task. Finally think about your preferences. Do you like self-priming pumps? Do you like automatic bilge pumps or manual pumps? After you have thought this thoroughly, shop around and purchase the bilge pump that you need.


About the Author

Professional reader. Hipster-friendly alcohol lover. Extreme writer. Creator. Lifelong bacon junkie. Avid gamer. Passionate organizer.



Comments are closed.

Back to Top ↑